Instead of what I'm supposed to be doing

I've got a couple of samples for pattern releases that desperately need to be knit. However, somehow all my yarn and needles and whatnot ended up in the bag with my spinning wheel after the Small Wool Gathering, which got transported to Basingstoke so that we could fit a fourth person plus luggage in the car on the way back to London. So...instead of working on knitting that needs to be done ASAP, I've been enjoying doing other thing.

Things like a little shawl sample for Allison out of Sweet Georgia CashSilk Lace (quite possibly the most gorgeous yarn in the world, just FYI).

I was also very eager to jump into a new sweater project for me - a few weeks back, Knit Edge 4 came out, with the fabulous Ruth Garcia-Alcantud on the cover in her newest gorgeous sweater design, Automne. I'm usually pretty good about not buying yarn on a whim, but I have to knit this sweater. Immediately. My mother had given me some money for my birthday, which I promptly dropped on a sweater's worth of Berroco Ultra Alpaca in a dark green. It arrived with my parents the week before SWG, and when I got back I started to swatch.

Here's where things went wrong: the yarn that Ruth used is very weird in terms of grist (i.e. how many yards there are in a pound). She used Cephalopod Yarns Beastie, which is listed as aran weight, but comes in at a chunky 140 yds/100 g. And the pattern calls for 3.25 sts per inch on US 10.5/6.5 mm needles. Ultra Alpaca is 215 yds/100 g. Somehow I didn't notice the vast discrepancy in grist when I was in the throes of my MUSTBUYYARNNOW!!! fit (bad spinner! No new sweater!). In any case, there was nothing else to do but swatch. So I did.

I was hoping that blocking would cause the alpaca to bloom, but sadly it didn't work out that way. My stitch gauge is spot on but the fabric is really thin and flimsy - not what I want for a sweater-coaty type thing. Bah!

The following days saw much searching of yarn databases and looking for more appropriate substitutes. Sunday saw a trip to John Lewis for my mother to get some yarn for a new sweater for her, and I grabbed a ball of Debbie Bliss Rialto Chunky to swatch with - at 66 yds/50 gr it is much closer to the yarn used in the original.

Much, much, much, much better. Still drapey, but much more substantial. But I'm not buying 24 balls of DB yarn at £6 a pop because, you know, my husband would divorce me. After several more days of searching and banging my head against the computer screen I finally pulled the trigger on a sweater lot of Elann Highland Chunky (76 yds/50 g) in Spiced Wine. Sadly, shipping to the UK was almost as much as the price of the yarn, so it's going to Maine and I will have to wait (sob!) to knit my gorgeous new sweater until after I go back to my parents' house. Which is likely to be next August (woe!).

So. Now I have a sweaters worth of dark green yarn to figure out what to do with . Therefore, I have been swatching...

This is only the first swatch. I've got about 7 more stitch patterns to go. I do not think this is going to be done by November. And I get all my deadline knitting back tomorrow. Guess I'd better keep swatching!

Sticks and carrots

With the start of school, Mother Nature decided that it was time to get back to normal weather patterns - so long glorious English summer of 2013 (truly glorious!), hello stereotypical grey damp autumn. The mornings have had that lovely bite to the air that means true woolen season is just around the corner. This is absolutely my favorite time of year (although I could do with a bit less rain...).

With the newly autumnal temperatures comes the ever predictable bout of startitis - I find myself wanting to cast on ALL THE THINGS! And to be fair, there are quite a number of things I should be casting on - two sample knits for patterns to be released next month first off, not to mention finishing off a shawl that's been on the needles for a couple of months now. But I find myself obsessed with the idea of casting on the perfect fall sweater - roomy, cozy, with long sleeves that come down over my hands and fronts that can wrap around. More specifially, I want the perfect fall sweater knit out of this.

My combo sweater spin from last winter when I was putting the miniSpinner through it's paces. So this week, I succumbed to the overwhelming desire to cast on, and knit...a swatch.

I think I've got the right needle size worked out, and I know the borders and cuffs are going to be in moss stitch.

Now it's just a question of using this project as a carrot to get the other stuff done. But if I play my cards right (and am a good designer do-bee), I can have a new sweater soon. I. Can't. Wait.

Unexpected inspiration

Over the last few weeks, spring has really exploded on the scene here in southeast England. As this is our first spring in our new residence, we've been having a fabulous time discovering new flowers in the garden, new trees to pass by, and (most importantly to Boo) a new place to spy wildlife. Our town green has a duck pond, and every morning for the last week we've been stopping on the way to school to gauge the population growth. There are some fancy orange and brown geese with four goslings, an albino Mrs. Mallard with 15 ducklings, numerous Canadian geese incubating progeny, and even a pair of swans on a nest. It's all very exciting.

With the plethora of feathered beasties around, wouldn't you know that my muse would settle on what might be the oddest of them all for my latest sweater inspiration. And I've spent the last week and a half scouring the local (and not-so-local) yarn shops for the right color yarn. After many fruitless trips about town, I began searching online, and have discovered a new use for mini-skeins:

They're just the right size for swatching. These three beauties are from fivemoons, whose lovely booth I visited at Wonderwool Wales. I think the Robin's Egg and the Nelly are going to be just perfect for what I have in mind, and the Forgetmenot base is just glorious (50% superwash Falkland merino, 50% silk). And she does DK weight too, which would be my preference, as a fingering weight sweater is too much of a commitment even for me....so now it's on to designing a stitch pattern and some sketching and a load of swatching. Fun, fun, fun!

A finished present, only 6 months after the fact

My lovely mother-in-law turned 70 last August, and as a present I gave her the choice of any knitted item she might like. After a bit of hemming and hawing, she said she wanted a sweater. Off I went to Ravelry to search for a pattern. After a bit of back and forth, she settled on a lovely pattern from Artesano Yarns. And now, several months later, it's all done.

Pattern: Rachel by Ros Wilson
Yarn: Bartlettyarns Fisherman 2-ply in midnight, just under 5 skeins for the 43" size
Needles: US 10/6.0 mm
Gauge: 15 stitches/20 rows per 4 inches
Start/finish: 4 November 2011 - 23 January 2012
Comments and modifications: Of course I changed things up - it's what I do after all. Can't leave well enough alone...

First off - the arms. The sweater is knit from one cuff to the other, casting on stitches for the body when you get there. The pattern calls for some seriously belled sleeves, but Mermaid wanted normally shaped sleeves, so I did a bit of math and off I went. Not a terribly difficult change, all in all, but I did have to take some careful notes to make sure the arms matched (since they were knit 2 months apart!). The only other change that I made in this version was to work a slightly deeper collar, to match the cuff detail.

However...the pattern, as written, is quite compressed, and I found what I interpreted as a number of errors. Nothing too egregious - mostly around the shoulder shaping and the number of rows that needed to be worked to get both sides to match. And a couple of instances where it seemed like an extra row was thrown in that would mean working things on the wrong side. It's entirely possible that it was operator error, so take that critique with a grain of salt. It's hard to complain with a free pattern after all.

If I made this sweater again (which I'm considering - it's nice and cozy), the only additional mods I would make are as follows: make the body a bit shorter - it's quite long in this version. Might be my gauge at issue, but when I tried it on, it came down way past my hips. I'd prefer it a bit shorter. I'd also change the hem. This has a double thickness hem around the bottom which I'm not a real fan of. I'd add a few of the same ridges that are around the sleeve cuffs and neck to make it a bit more cohesive.

The overwhelming upside of this project was the glorious yarn I used. Bartlettyarns are one of the last mule-spun yarns made. This results in a rustic, nubbly, almost-handspun feel that was a pleasure to work with. And as I was seaming up the finished item, I noticed an interesting thing about the yarn after blocking.

See that? The strand on the left is the unwashed yarn I used for seaming, the one on the right is the end of my blocked swatch. There's a bit of difference, no? I love how much the yarn poofs up after finishing, and I'm really glad I washed my swatch before I checked the gauge and cast on. Imagine the disaster otherwise!

So Mermaid: the sweater is finished. It needs one more bath to even out the seaming, and then it can be on it's way to you. It might go via the Far East though, depending on how organized I get. Hope you can wait! But I'll need some better pictures once it makes it to its new home, ok?

Travel knitting again

While I was packing on Friday, I kept thinking of the knitting things I wanted to work on, and try out, and oh maybe I should bring that just in case. By the end of this internal dialogue and random collecting of yarn and needles and patterns, I had a pile of stuff larger then the pile of clothes I was bringing. Ehem. This is what happens when I pack for a trip and Himself isn't around to quell my hoarding impulses.

So I took a biiiiiiiig step back and realized that I really am looking at three major knitting times - two plane rides and knit night on Thursday with the ladeez (which, to be fair, is likely to involve lots of wine and food, and not so much on the knitting). So I whittled the pile down to:

1) the handspun Sprout Tappan Zee for the elder child-demon*
2) a hank of Cascade 220 Heathers and a bunch of charts from BW's books to try out some swatches for a new design

That was it, until I 3) tossed in a couple of balls of grey DK weight superwash merino to try for the Gherkin mittens that should have been released in pattern form almost a year ago...still, three projects isn't so bad, is it?

* so designated because, after arriving at our home for the week at 8:30 pm local time/2:30 am our time, she decided that 2:30 am local time was time to be awake. I managed to keep them corralled with a combination of threats, sheer force and DVDs on my laptop until almost 6:30, but I'm still considering child-icide.

Monogamy is boring

Project monogamy that is. I've been slogging away on the handspun sweater without a break for the last week plus, and I'm almost to the underarms. It's lovely, but I've had to tink back 300+ stitches several times because I used the wrong color a few rows back, and I'm getting a bit tired of it. Thank goodness it's April 1st and I can start my new socks!

Originally this yarn was slated for Vinnland socks, but when I pulled it out I decided that particular pattern really needed a solid color yarn. So I cast on for Nornir, the Round 2 pattern for Sock Madness 5 - it's working beautifully with the short color runs in this yarn (Woolcraft Superwash Sock Yarn).

I also had a fit of procrastination last week and finished spinning up the Little Barn tweedy fiber I started at the last Spin Night at the beginning of March.

 

It's actually a lot darker in real life - teal and navy and fuschia. The two big skeins are 562 yds of true 3 ply, fingering weight. The teensy skein is the remaining singles chain plied - I didn't both to measure the yardage, but it's probably somewhere in the range of 15-20 yds. Aka not much. This is not the softest yarn in the world, but it will be okay for mittens or something like that, somewhere down the road. Spun/plied at 15:1/12:1, drafting style was short forward draw from the fold.

I've also got a couple more sweater projects on the brain, so there's been much swatching going on.

This is the latest one. The plan is to knit up the prototype in the next month and write up that pattern for testers to finish by early June. I think it will be cute, but we'll see.

So, Month 3 is done - socks were finished, sweater was not, but I'm still plugging away. Hopefully it will be April's sweater.

Status report

OK, it's January 6th - where do things stand on the January projects?

Item the largest: Falkland spinning. Given the magnitude of this undertaking and the time frame, I've chosen to do a bit of sampling to make sure I get in the same ballpark as the orginal yarn. The sweater was knit in nine natural colors of Shetland 2000, a fingering weight Shetland wool yarn. 190 yds/50 grams, which works out to 1727 ypp. The gauge for the sweater is 32 stitches/32 rows per 4 inches (something has to be wrong with that row gauge, but whatever) on US 4/3.5 mm needles. It has taken me quite a while to figure out how you get 8 sts/inch with fingering weight on US 4 needles, and I've actually given up and moved on.

Sample #1: spun long draw, from top split into four chunks lengthwise, 15:1, plied at same ratio, finished with a soak in Soak and warm water. I knit a swatch with the suggested needle sizes (US 3/3.0 mm and US 4/3.5 mm) and then threw in US 2/2.75 as well. The swatch was then soaked in the same manner as the yarn, and I measured the gauge after it was dry.

Results: 17.5 yds/0.2 oz (7g) = 1326 ypp. Too heavy, although handspun tends to be denser then millspun, so maybe ok. Gauge with US 2/3/4 respectively: 7 sts/10 rows, 6.5 sts/9 rows and 6 sts/9 rows per inch. Hmmm...

Sample #2: spun from the fold, 15:1, short forward draw, drafting against twist. I didn't feel like I was getting very consistent singles with my long draw, so I tried something a bit different. Finsihed yarn as for #1. Swatched with US 1/2.25 mm and US 2/2.75 mm.

Results: 14.2 yds/0.176 oz (5 g), 1291 ypp - not surprisingly, the more worsted style of drafting gave me a denser yarn. Gauges: 7.5 sts/12 rows and 7.5 sts/11 rows respectively, but the swatch is a bit bulletproof. Which led to

Sample #3: spun from the fold on my highest ratio (17:1), but plied at 12:1. Drafting was more of a short forward draw, but I still tried to draft against twist. The singles were definitely finer - closer to 55-60 wpi then the 40 wpi I got with #2. Swatched with US 1 and 2 again.

Results: Wiktory! (I think) 12.75 yds/0.14 oz (4g), 1475 ypp. Gauges: just over 8 sts/6 rows and just under 8 sts/10 rows per inch. The swatch is still fairly soft and bares no resemblance to Kevlar. Or elica82's socks.

One thing I have learned is that this Falkland reacts like a puffball mushroom when it hits water - poooooof! I suspect that my gauge will loosen up a bit with the colorwork, so now I need to come to terms that I may be knitting an entire men's sweater on 2.75 mm needles. Thankfully, the chest size has gone down quite a bit from my first estimate, so I'm not worried about running out of fiber. My problem is going to be running out of time!

Ok, on to other projects:

Smaug socks - 5 repeats and a heel flap done as of 5 January 2011 (Tomorrow Never Dies gave me a good opportunity to get ahead).

And the IM Aran front: five repeats of the main cable done as of last night.

So tonight - throw the kids in bed by 7:30, knit 12 rows of cabled goodness and then spin, spin, spin.

Note: everyone reading who has not posted a comment on my list for 2011 better go do so: otherwise JoAnna will be getting a large package of wooly goodies all by her lonesome! I'm looking at all y'all down there in Houston (or in Switaly as the case may be), you and you in Chicago and you who are related to me (Mom!). It's really easy - just click on the comment button and tell me your goals for 2011, knitting or otherwise.

FO: The yarn that was supposed to be Tempest is now something else!

Pattern: Tappan Zee by Amy King
Yarn: Yarn School Corriedale Cross, ~675 yds.
Needles: US 5/3.75 mm bamboo circulars
Start/finish: 26 March - 26 April 2010
Gauge: 20 sts/32 rows in 4 inches
Comments/modifications: What a lovely and quick (despite my time line) knit! A top down circular yoke is not a sweater style I've knit before, but it was really fun. The lace pattern in the yoke keeps it from getting too monotonous, and the yarn colors helped with the monotany on the body. I made one major modification: instead of binding off the sleeve stitches when I got to them, I put them on holders. My thinking was that I wanted to put sleeves on when I was done with the body, and make them as long as the yarn held out. Once I was done with the body, I decided to keep the cap sleeves for the moment, so I bound off in knit from the wrong side. That way, in the fall when it starts getting cooler, I can pick out that bound off edge and knit the sleeves down.

I love the diamond detail at the bottom,

which matches the diamonds in the yoke.

Now for the yarn. I blogged about the spinning last spring/summer, but discovered when I started swatching, that the yarn need a bit of TLC. As you can see,

I was a wee bit tense when I did the plying. Perhaps I was a bit overplied myself, what with the move and all, but there is some serious skew in that stockinette. Add to that the fact that the yarn was not so pleasant to knit with (read: wiry, stiff and scratchy) and I decided that I needed to do something to take out some of the plying twist.

I took the three skeins I'd planned to use for the sweater (based on relatively similar grists) and ran them back through the wheel to take out some of the plying twist. I basically put the brake band on tightly, and re-plied the yarn with the wheel spinning in the same direction as when I spun the singles. I more or less let the yarn run onto the bobbin with only a little bit of tension, but if I came across a section that was really over-plied I held on a bit longer. Reskeined, rewashed, redried, and reswatched.

Much softer, much less noticeable bias, much more pleasant to work with. I've gotten a wee bit obsessed with grist recently, so I noted what these skeins came in at: 253 yds at 1094 ypp, 285 yds at 1140 ypp and 225 yds at 973 ypp. I started with the heaviest grist on the top, since the skein I have left for the arms is also around 975 ypp, and I wanted the lighter fluffier stuff in the body.

So all in all a great success. I desperately need to find the right buttons for it, but that may have to wait for a bit, since we've now entered The Month of Nonstop Houseguests. We currently have four parents and four girl children, aged five and under, in our house. As soon as the extra parents and children leave, we get an old friend from Tucson and his SO for a few days, and then a couple weeks later, Nana arrives. So forgive me if the blogging is a bit hit or miss for the next few weeks. Maybe I'll be able to get back here regularly when we finally have a functioning government!

The Knitting Olympics

You may have noticed a new, un-photographed project that has shown up in the sidebar over there to the right with an intriguing title. Because this is exactly what I need - a hole in the head. Or another project, in this case.

But, but, but...it's the Olympics! Today's the day! And Stephanie is on board again! How could I say no? For the previous Knitting Olympics in 2006, I knit my first lace shawl, Adamas (pre-Ravelry, as if such a thing were even comprehensible anymore!). I was not successful, but it was the first lace thing I'd ever done, and I got most of it done during the Olympics, so it was a good experience.

This year, I've decided to tackle a project that has been on my list for a long time - the Ivy League Vest. Here's why this is a challenge for me: I have a serious Fair Isle/colorwork planning block. The knitting of this will not be a problem, and I've done steeks once before, so that's not a huge deal, but I despise don't really care for the colors used in the original. And figuring out which colors look good together is not my strength. So I knew that I wanted to do different colors, but it was a huge inertia block for me to actually do the work to figure out how to change them.

Enter this week: Ironman has been in Australia for work, so I've had the freedom to play around with the bazillion colors of Knit Picks Palette I bought for this exact project, and make teeny swatches with lots of ends hanging off of them. Here's the first, knit on the recommended size 4/3.5 mm needles:

Final gauge: 6 stitches/inch, so those needles won't work. More importantly, the combination of Eggplant, Clematis Heather, Fog, Mist, Bittersweet Heather and Hyacinth won't do. Next:

This swatch was knit on US 2/2.75 needles using Ash, Clematis Heather, Mist, Fog, Lipstick and Cream. Stitch gauge, 7 stitches per inch, color combo, ick.

At this point, it was 11:30 on Sunday night, and it was well past time for bed. Except that I went to bed and lay there for an hour obsessing about colors and what should go where, and so on. Silly Porpoise. Since IM was away, I found myself downstairs at 1:00 in the morning scanning black and white images of different colors of Palette. Because I seem to remember reading somewhere that an important issue in colorwork is contrast. And if you're substituting colors, it will come out better if you get similar contrast values between your substitutions and the originals. These contrast values are easiest to see in B&W.

I also realized that the pattern uses two colors in each of three families: white, tan/brown and green. Green was out, and I'm not so taken with the tan/brown option. Whites, fine. Tan/brown became greys and green became either purple or blue.

The grays down the left side will be ok, but the navy was too dark.

This was better.

This one had the same contrasts as #2, but with a purple heather instead of the blue. So then it was time to swatch. By the time I finally went to bed on Sunday night/Monday morning, I had half of this done:

The observant among you may realize that this is none of the combinations that I meticulously scanned. I decided to try a purple version (with Huckleberry Heather and Iris Heather) and a blue version (with Pool and Blue Note heather). This swatch was also done on US 2/2.75 mm needles, but my final gauge came out at 8 stitches per inch, so I think I'll be going with a US 3/3.25 mm needle.

I like these combinations much better then the ones I first started with. So the B&W option was very helpful in narrowing things down. I've got my needles ready to go - some lovely bamboo circulars* - and I will be casting on as soon as the girls go to bed tonight** with these yarns.

Clockwise from lower left: iris heather, clematis heather, marble heather, mist, fog (now called silver apparently) and asphalt heather in the center. There's got to be a little bit of mystery in this, right?

Citius, Alitius, Fortius!

*  I'm hoping to be able to get this project on to the plane for our trip on Monday - that's three hours knitting time right there.
** I realize this is not kosher. However...the Opening Ceremonies will be starting at something like 1:00 am Saturday for me. That's the loss of an entire, unencumbered evening's worth of ribbing. And given that we leave at 8:30 Monday morning for seven days half-term holiday in North Africa, I feel that missing out on this chunk of time will doom me from the beginning. So...I will aim to finish by the same time minus half an hour on the 28th (the Closing Ceremonies start 30 min earlier then the Opening Ceremonies).

A big project

I'm embarking on my first, real-live "spin a specific yarn for a specific pattern" odyssey, using the two pounds of dyed purple "wool top" mentioned in this post, spinning a worsted weight yarn for this lovely pattern.

Here's what I need: ~1300 yds of worsted weight yarn, with a grist of 840 yds/pound. The good news is that since I have two pounds of fiber, I've got a bunch to sample with before I run up against the 1.5 pounds I'll need for actual yarn for the sweater.

Other things I "need": a yarn structure that will work well with garter stitch and the fancy stitch pattern in the yoke. To me this is crying out for at least a 3-ply yarn, just because lots of plies make for a rounder yarn that rocks the hell out of the garter stitch.

I also "need" a way to spin this that won't A) take forever and ever, amen and B) will give me a lofty, puffy, snuggly yarn that will result in a lovely snuggly sweater.

Sampling Plan A: the 3-ply versus the 4 strand cabled yarn. I took two 1 oz chunks of fiber, and spun them up using my version of long draw, from the fold. For one aliquot of fiber (that's not the right word and it sounds really funny to use it in this context, but it will work), I split it in three equal chunks, spun each chunk on to a separate bobbin at 7.5:1, and did a true 3-ply.

Before washing

After washing, and a more representative photo of the actual yarn color

The second fiber aliquot got split into 4 chunks, spun the same way. Two sets of two bobbins were plied together at 9.25:1, aiming for an overplied 2-ply. Then those two bobbins of 2-ply were plied back on each other at 7.5:1.

I checked the wpi of the two sample skeins before finishing: the 3-ply was about 14 wpi, and the cabled yarn was about 12 wpi. I was aiming for about 10 wpi in the finished yarn. Since both yarns were a bit on the fine side, I did a fulling wash: yarn was dunked in hot water with Soak with a bit of agitation, then put in cold water and agitated again. Repeated the hot/cold switch until the strands in the skeins started to stick together a bit, then squeezed out the excess water, thwacked against the side of the house, and hung to dry.

Here they are post-wash, 4 strand cable on the left, 3-ply on the right. I ended up with ~30 yds of the cabled yarn, and 60 yds of the 3-ply. As expected, the 3-ply ended up a bit on the light side, coming in with a grist of 1066 yds/pound. The cabled yarn was much closer - 800 yds/pound.

Now it's time to knit up some (gasp!) swatches. Thankfully, just in garter stitch. I also need to consult The Grist Bible and perhaps some of these technically inclined folks to see how close my grist needs to be for this scenario. Plan B, if these really don't work out, will be a true 4-ply with lots of plying twist, and maybe a 5-ply (!).

It must be autumn

Because people are wearing sweaters now, and it's not doing good things for my startitis.

Devil and I went to the story hour at our local library today, and I don't remember what we heard because I was so taken with two sweaters there. The first was a heathery pink number on an adorable little girl who was probably 20 months old. It was a standard yoked cardigan, with one button at the very top, seed stitch hems/neck/front bands, and a bunch of eyelet rows in the yoke to give it a bit of interest. I scrounged in my bag for a pen and a receipt and made a quick sketch, probably scaring the crap out of my neighboring caretaker. Turns out that this looks like the exact pattern*, so I won't have to reinvent the wheel. Score!

The other sweater was a grown up one - another cardigan with seed stitch accents, but this one had two buttons, patch pockets on the front, a shirt collar and was knit up in a drapey chocolate brown yarn that looked incredible. I immediately thought of this yarn,

which my mother found somewhere in Maine and sent me several years ago. I've got a whole bunch of it, so when I start swatching this evening, I might whip up some of that and see how it goes. It feels pretty crunchy in the skein, but I'll do up a couple of swatches and abuse them in inventive ways.

Maybe when I go back to work I'll stop with the crazy designing inspiration. I can only hope, because otherwise it's going to put a huge dent on my ability to concentrate on other things!

* I don't think I've mentioned recently that Ravelry kicks arse. Took a millisecond to find this pattern.

The dreaded "S" word

Last week at WHMU(WHSKAL), I swatched. Which is something that happens pretty rarely around here, so I thought I'd babble about it a little bit.


Usually I don't swatch. My gauge is usually pretty close to the recommended gauge on ball bands, so for things like socks I don't swatch. I don't swatch lace. I don't swatch for scarves or mittens or hats. In fact the only thing I do swatch for occasionally is a sweater.


Typically I'll start with a sleeve if I'm worried about the gauge and check that after a few inches. But if it's something that for which gauge is really important, I'll do a swatch. Or a yarn that I have no information on for appropriate gauge. Or if I'm not sure how the yarn and the pattern will work together, I'll do a swatch.

I've been wanting to do Manon for a while now (Rav link). And since it's another Norah Gaughan funky construction type of thing, I figured swatching would be in my best interests. So I threw the newly dyed Italian yarn into a bag along with three needle sizes and headed for Whole Foods.


Three needles sizes you ask? Yup, three sizes. Because nothing pisses me off more then knitting a gauge swatch with a particular size and then finding out that it's wrong. So I use multiple sizes on the same swatch and then pick the one that works best after washing/drying.

For this sweater the pattern calls for US size 9 needles. Usually I would try to bookmark the needle size (i.e. use one size smaller and one size larger), but I couldn't imagine that I would need a US 10 for this, so I took US 7/8/9 as my needle range.
Recommended gauge for this project is 18 st/24 rows for 4 inches. I cast on 26 stitches with the 7s, knit about 4 rows in garter stitch and then started working in stockinette stitch, keeping 3 stitches on each edge in garter. After a while, on a wrong side row, I knit 7 stitches. After a while more, I figured I had enough to be able to check the gauge, so I knit one entire wrong side row, and then switched to the 8s.

click for notes

The process proceeded as above except that instead of knitting 7 stitches in the middle of that stretch, I knit 8, and so on (9 stitches with the size 9s). This makes it very easy later on to figure out what needle size I used for which section of the swatch, without having to rely on an easily lost piece of paper. The swatch is finished with several more rows of garter stitch. I finished this one easily that night, and tossed it into a cold bath when I got home (although I did start the sweater before measuring the blocked swatch - thankfully the gauge didn't change!).

click for more notes

I'm happy to say that, not only was my gauge spot on with the US 9s, but the swatch didn't bleed at all, proving that my improvised solar dyeing/steam setting of the dye worked pretty well. It is slightly variegated, which looks just gorgeous when knitted up. And I've got a gauge swatch that tells me how the yarn works on 7s and 8s too, just for future reference.

Ouch

That is what your wrist says after spending most of an entire day in front of the spinning wheel. I did stop while the AC guys was here (you would not believe what was growing in our drain line!), and to go for a run and to the store, but other then that, I was glued to the Lendrum. I managed to spin up a little more then half of the 5 oz of fiber I had by early evening, and plied while watching the Celtics-Lakers game (grumble, grumble). Tonight I'll finish (hot/cold/hot/cold/thwack, thwack, thwack) and maybe be able to start some mittens by Friday. And there's still a couple of ounces left to spin...

But, given that my right wrist is somewhat unhappy with me, yet again, I think tonight is for some swatching. For some reason, June in Houston is making me think I need to knit a sweater. A nice wooly sweater. It must be the heat index driving me nuts, because this is totally stupid. Given the insanity of the idea, I have fixated on the Gathered Pullover (Rav link) from Interweave Knits Winter 2007. The question now is: which yarn?

Some lovely, bluey-purple Silky Wool,

Oh how blurry. And not really accurate as to color...

Or some nice red stuff recycled from a Goodwill find?

Color accurate. Mostly.

Any thoughts? I just did bluey-purple, so I'm leaning towards the red, but I have no idea if the recycled stuff will work well (and there are plenty of examples of Silky Wool Gathered Pullovers on Ravelry). Hmmm...

A near thing

Last summer Ironman went to Peru and brought me back some alpaca. In fact, he brought back lots of alpaca. 30 balls. Fingering weight. Two colors. It's gorgeous stuff, but since I wasn't sure what to do with it, I stuck it in the closet to marinate.

Recently I've come down with a major case of startitis. Whee - a shawl!...oooo, look over there, pretty fiber! Hmmm, I think I need a new sweater project... Some of this may have been encouraged by the lovely, but unseasonable weather that has been lingering in the Houston area, and the rest of it by the Website That Shall Not Be Named. But I found a lovely, retro pattern that was appealing, and decided maybe it would be a good fit for my lovely alpaca.

To recap:

Alpaca sweater.
Fingering weight.
Black.
In a Houston summer.

Does this seem like a good idea to anyone?

Thankfully, I swatched yesterday, and have been deterred from my path of madness. The yarn is gorgeously soft, knits up into a nice stockinette fabric, but the cables are pretty appalling. As in, they disappear into mush. This may change after a bath, but I'm not optimistic. So I think the alpaca will disappear back into the stash closet for a while longer, although I've got some ideas about other uses for it.

Do you see a cable here? I don't see a cable here. Nope, nothing to see here.

The North Roe shawl is still a shapeless blob of bright green and brown, but it's getting larger. I'm well in to the second chart and am looking forward to the last.

Unfortunately, I've reached that stage in shawl knitting where the rows take forever (~3 rows/bus ride, not conducive to rapid progress), and it's starting to drag. This may also contribute to the startitis a bit - I'm not going to mention the other swatching action that is ongoing. Best not to confess to too much methinks!